We can provide scintillator detectors with PMT, SiPM or PD.It can be applied to many purpose such as radiation spectrometer, personal dosimeter, security imaging,pulse signal, digital signal,photon counting and measurement.
Our product series are as below:
1. SD series detector
2. ID series detector
3. Low energy X-ray detector
4. SiPM series detector
5. PD series detector
SD Series Detector
SD series detectors encapsulate crystal and PMT into one housing, which overcomes the hygroscopic disadvantage of some crystals including NaI(Tl), LaBr3:Ce, CLYC. When packaging PMT, internal geomagnetic shielding material reduced the influence of geomagnetic field on the detector. Applicable for pulse counting, energy spectrum measurement and radiation dose measurement.
ID Series Detector
Kinheng has capability for integrated detector design. On the basis of SD series detectors, ID series detectors integrate electronic components, simplify the interface, and make the use of gamma ray detectors easier. Supported by integrated circuits, the ID series detectors provide lower power consumption, lower signal noise, and more powerful functions compared with previous devices of the same volume.
Detector definition:
A scintillator detector is a device that uses scintillators to detect and measure various forms of radiation such as alpha, beta, gamma and X-rays. Scintillators are materials that emit light when excited by ionizing radiation. The emitted light is then detected using a photodetector such as a photomultiplier tube (PMT), which converts the light into an electrical signal that can be measured and analyzed.
A scintillator detector consists of a scintillator crystal, a light guide or reflector, a photodetector, and associated electronics. When ionizing radiation enters a scintillator crystal, it excites the atoms inside, making them glow. The light is then directed or reflected to a photodetector, which converts the light into an electrical signal proportional to the energy of the incident radiation. Associated electronics then process the signal and provide a measurement of the radiation dose.
Scintillator detectors are widely used in medical imaging, radiation therapy, nuclear physics, environmental monitoring, and other applications that require detection and measurement of ionizing radiation. Their high sensitivity, good energy resolution, and fast response time make them ideal for a wide range of applications.
SD detector
ID detector
Post time: May-05-2023