-
PMT& Circuit Integrated Detector, integrated Scintillator detector, Scintillation crystal detector
Kinheng has capability for PMT and circuit integrated detector assembling. On the basis of SD series detectors, ID series detectors integrated electronic components, simplify the interface, and make the use of gamma ray detectors easier. Supported by integrated circuits, the ID series detectors provide lower power consumption, lower signal noise, and more powerful functions compared with previous devices.
-
SiPM Detector, SiPM scintillator detector
Kinheng designed SiPM scintillator detector based on various scintillators, S series detectors use silicon photodiodes(SiPM) instead of traditional photomultiplier tubes(PMT) to detect gamma rays.
-
Photodiode Detector, PD detector
Kinheng provides scintillator coupled PD (photodiode) self-contained modules. According to different applications, our company can provide high-energy P0.78, P1.6, P2.5, P5.2mm PD, which are widely used in security inspection (border inspection, package inspection, airport check, etc.), high-energy container inspection, heavy vehicle inspection, NDT, 3D scanning, ore screening and other industrial fields as well.
-
PMT Separated Detector, PMT combined Scintillator Detector
SD series detectors just encapsulated crystal and PMT into housing, which overcome the hygroscopic disadvantage of some crystals including NaI(Tl), LaBr3:Ce, CLYC. Internal geomagnetic shielding material reduced the influence of geomagnetic field on the detector. Applicable for pulse counting, energy spectrum measurement and radiation dose measurement.
-
Low Energy X Ray Detector, X-ray Detector, Low Energy Detector
Kinheng designed Be window detectors for low energy X-ray detector. According to the traditional encapsulation method, the detection efficiency of X-ray is low. X-ray detector used 0.2mm thickness Be window to replace traditional 0.8mm thickness aluminum shell. The X-ray detection efficiency was improved significantly. X Series detector follows the design idea of detachable and replaceable. It can use either NaI(Tl) crystal with output pulse width of 1.5us or LaBr3:Ce crystal with output pulse of 0.5us to meet the measurement requirements of high and low doses.
-
Electronics Module, Data acquisition card, DMCA, PHOTON COUNTER
PS series Electronics module, applicable for PMT single output module.
Ps-1 needs separate HV, low voltage and signal output. It can be connected with our SD series detector for radiation measurement, gamma ray detection and spectrum analysis.
PS-2 module is adjustable device for signal pre-amplitude, single width and HV. Inside circuit integrated power protection. It can be connected with our SD series detector for radiation measurement, gamma ray detection and spectrum analysis.
Radiation measurement, technique for detecting the intensity and characteristics of ionizing radiation, such as alpha, beta, and gamma rays or neutrons, for the purpose of measurement.
